DN25-DN315 SDR11 Socket Reducer PE Electrofusion Fittings

• PE SOCKET REDUCER DN25 - DN315 PE ELECTROFUSION FITTINGS SDR11
• Electric hot wire pre-cladding technology, extremely prevent the oxidation of the hot wire, to prevent the occurrence from short circuit during the installation process;
• PE Reducer standard EN1555.3/ EN12201.3/ ISO8085/ ISO4427.3;
• PE100 Reducer applied for gas pipeline pressure reach 0.7Mpa, and water-supply pipeline pressure reach 1.6Mpa;
• PE80 Reducer applied for gas pipeline pressure reach 0.5Mpa, and water-supply pipeline pressure reach 1.25Mpa;
• The welding voltage 40V, the bar code on the fitting gives the best welding parameters.

  D×d mm	D1 mm	L1 mm	d1 mm	l1 mm	L mm
  32×25	47	41	38	40	88
  40×32	57	43	48	41	93
  50×32	67	49	48	41	100
  50×40	67	49	57	43	100
  63×32	87	50	48	41	115
  63×40	87	50	57	43	115
  63×50	87	50	67	48	115
  75×63	96	65	82	59	133
  90×63	115	70	87	58	141
  110×63	140	68	87	58	161
  110×90	140	68	115	74	161
  160×90	203	81	115	70	211
  160×110	203	81	140	74	210
  200×90	247	112	119	79	250
  200×110	246	110	140	74	250
  200×160	246	110	198	95	245
  250×160	310	129	198	95	284
  250×200	310	129	246	110	276
  315×200	391	150	250	112	322

DN315 PE Electrofusion Fittings

DN25 PE Electrofusion Fittings

SDR11 Socket Reducer

DN25-DN315 SDR11 Socket Reducer PE Electrofusion Fittings Images